Technical Parameters:
Laser Type: CO2 sealed laser Laser Power:300W( TWO SIDE CUTTING,two
laser tube 150W )
Max Width:1200 x 1600mm(1325 /1218/1224/1212/1290)
Driving Mode:Stepping System Leadshine brand
Laser Tube: Beijing Reci Tube Lence: American lence
Cutting Precision: 0.03mm Repetition precision:≤0.03mm
Maximum Cutting Thickness: 25mm, wooden material, but not metal
material.
Protection Gas: Dry and oil-free air
Electricity Needs: single-phase electricity 220V±5% 50HZ 10A
Cutting speed:0-3000mm/min softward setting( 18mm wooden board,
450mm/min)
Numerical Controlled panel: LCD screen, light-touched key-press
Translation Port:USB conncetion, off-line operation
Support Format: DXF,DST,BMP,PLT...etc (auto CAD,CDR)
Control System:SH-Laser precision mould cutting system
Dimension:3260 x 1700 x 1400mm
Working Temperature: 0℃-45℃
PRODUCT CONFIGURATION (PCF)
- Imported Taiwan silver head rail, Taiwan silver rolling poles.
- There is 64MB MEMORY, can be used under off-line condition.
- A set America imported II-IV lens, China Beijing manufactured laser
- China Shandong Manufactured laser power,
- 2 sets exhausting system, self-manufactured cooling water tank
- Professional cutting software can be read CAD,COREDRAW....etc.
graphic softwares.
- One set Taiwan manufacdtured air drying machine.(a set oil-water
filter)
- , a set common used tools.(including hexagon wrench,light-adjusting
board)
Ten Hot Points:
- Fixed light path (the laser working head is fixed, the board moves)
- Bi-directional imported precision ball screw driving (more precise
than general one), with the error of precision electronic mould of
0.05mm.
- Cut through 18-25mm at a time, comes with vertical and even sharp
board slit, with the speed of cutting one meter line in 2 minutes.
- High-strength stable mother machine, weight about 2000kg,without
distortion after long-term operation.
- It is always available & no need to wait for on-off, save time &
costing.
- It's easy to adjust light and focusing, can oeprate after basic
training.
- No need auxiliary gas during working(300W power machine type)
- Simple & clear adjusting technical of knife gap,cutting software
can accept AutoCAD,CorelDraw,Adobe Photoshop, very fast to learn
and operate.
- External power of 220v with low consumption cost—the elements
(laser tube and lens, etc.) only cost less than 5 Yuan per hour.
- Full set product output plus strong technical support, offer
training for operater,keep no worries for future operation.
Applicable Industry: Mould & Printing & Packing Industry
Applicable Material: Wooden Board and Engraving Board
